Questions To Ask A Dumpster Rental Company

Choosing a dumpster rental company can be a very big decision. You need to research the companies to make an informed choice. However, it is important that you know what questions you should be asking the dumpster rental to ensure that you choose the right dumpster rental in Fulton county ga for your needs.

How Long Can You Keep The Dumpster For?

When you look at dumpster rental companies, you need to carefully consider the length of the rental period that they offer. Some companies will offer rental terms of 5 days while others will provide the dumpster for longer than a week. You will get better value for money when you choose a dumpster rental company that has a longer rental period.

Shorter rental periods will be cheaper, but you should not be drawn in by the lower costs. If you are unsure about how long your project is going to take, the shorter rental period could put more pressure on you. It is recommended that you choose a rental term that is a bit longer than you are expecting the project to take to give yourself some leeway.

Are You Responsible For Scheduling Pickup?

What many people do not realize is that most dumpster rental companies will expect you to call them for pickup. This is done to ensure that the company does not take away a dumpster that is still in use when a project runs for longer than expected. However, if the dumpster stays with you for longer than the initial rental period, you will be charged additional fees.

It is important that you find out what the fees will be and ask the company about the pickup policy. Some companies will not require you to call for a pickup but will need you to call if you need the dumpster for a longer period. Knowing all of this information before you rent the dumpster is important so you can find the company that works the best for you.

Are There Any Extra Fees?

The rental fee is not the only cost that you have to consider when you look at a dumpster rental company as there are many additional fees they could charge. These fees will be applied if certain aspects of the rental terms are not followed. The most common fees you should know about are extension fees for when you exceed the rental period, trip fees for when the company cannot drop off or pickup the container due to obstructions on your property and overage fees for overweight containers.

Any honest dumpster rental company will be up front about all of these costs. You need to find out all of these fees before you hire the service to ensure that you do not run into any unexpected expenses.

Will You Be Getting A Flat Rate?

It is important that you find out about whether or not you are going to be getting a flat rate. Some rental companies charge by the ton while others will charge a flat rate. Ideally, you will want to use a company that charges a flat rate.

The advantage of having a flat rate is that you will be able to throw away as much as you want as long as you do not exceed the hard weight limit of the actual dumpster. If you are charged by the ton, the more you throw away, the more the rental will cost. This will also limit the estimations that you can make regarding how much the dumpster rental will cost you.

Who Weighs The Dumpsters?

Many people do not think to ask the rental company who is going to be weighing the dumpster once it is taken away. You will want to work with a dumpster rental company that has the dumpster weighed by a third-party. This ensures that everyone will be happy with the weighing and that there is little chance of being charged fees for a dumpster that is not overweight.

When asking this question, you should also find out if you will be provided with a weight slip. The weight slip will tell you when the dumpster was weighed and how much it weighed. This will be your insurance against any fees for overweight dumpsters.

Real Estate Tips In Fiddlers Creek

Real estate is a nuanced world where you can make mistakes without realizing it.

To ensure you are not making a horrible error that comes back to haunt you for years, it is time to think about the buying process in Fiddlers Creek. While fiddlers creek homes naples fl is heralded as a top-tier place in Naples, you will still want to be careful and get full value for your investment.

Here is what you will have to think about as you are picking a good fit and moving to Fiddlers Creek in Naples.

1) Visit The Area

The first thing you should be doing is visiting the area as soon as you can.

By visiting the area, you can get a feel for what it has to offer and how it is as a community. Fiddlers Creek is ideal for those who love golfing, boating and being around friendly people. You will have a great time, and that is something to factor in with your decision.

Real estate is all about finding a happy medium between investing and living. Don’t forget this!

2) Understand Future Value of Market

The market has to be trending in the right direction for you to be content with what you get. If you are not content, you will hate the direction you go in, and that is going to bother you. Make sure you understand the future value of the market and get more out of it.

Those who do this will feel happy with the direction they are going in.

You will be able to invest in the property and watch it rise as time goes on. This is where you will make a lot of money.

3) Value Golf Course’s Potential

The golf course is one of the best in Naples, and you are going to see people from all walks of life attend during the year.

The weather is great in this part of Naples, and that means golfing is always an option for locals. You are going to see people visit the course because it is a PGA level location. It is one that has been used by the likes of Tiger Woods in the past.

Why not tap in and make the most of its value when you are moving in? You will realize it always has a positive impact on the real estate value of the region too.

4) Don’t Get Stuck On One Property

This is a mistake a lot of new buyers make, and it is natural.

You tend to get stuck on one home, and that is all you can think about. Well, this is great, but you can’t make a mistake as it will cost you. It is going to lead you to overextend during negotiations, and you will get the raw end of the deal. Don’t let this happen and give yourself time to adjust.

Look around and give yourself the opportunity to see what is out there. You might be surprised.

5) Take Your Time

You have to take your time with any purchase, and that goes for luxury homes in FIddlers Creek.

At the moment, there are 6000 properties in the community, and that means a few will be on sale at any given moment. You want to take your time and look at all of them as long as they are within your range. Many people don’t even bother to do this, and that is a horrible mistake.

You are going to be missing out on a potential winner if that is the approach you take.

If you focus on these tips and make sure they are a part of your mindset going to Fiddlers Creek, you will be able to optimize the process. You will not end up with a dud that is going to fail over time and is going to make you feel awful because of its investment potential.

Go with an excellent property and know it will hold value for years to come as long as you maintain it as necessary. Those who pay attention to these tips will always feel confident about their time in this part of Naples and what it yields.

ICF’s

What Are ICF’s?
Insulating Concrete Forms are basic forms for poured concrete walls. Unlike traditional concrete wall construction, which utilizes steel or aluminum forming panels that are removed after the concrete is poured, ICF formwork stays in place to become a permanent part of an insulated wall assembly. The lightweight forms, made of foam insulation, are either pre-formed interlocking blocks or separate panels with plastic ties. The left-in-place formwork not only provides a continuous insulation and sound barrier, but also a backing for drywall on the inside, and stucco, lap siding or brick on the outside.

Types of Insulating Concrete Forms
Although all ICFs are identical in principle, the various brands differ widely in the details of their shapes, cavities and component parts.

Block systems have the smallest individual units, ranging from 8″ x 1’4″ (height X length) to 1’4″ x 4′. A typical ICF block is 10″ in overall width, with a 6″ cavity for the concrete. The units are factory-molded with special interlocking edges that allow them to fit together much like plastic children’s blocks.

Panel systems have the largest units, ranging from roughly 1′ x 8′ to 4′ x 12’. Their foam edges are flat, and interconnection requires attachment of a separate connector or “tie.” Panels are assembled into units before setting in place – either on-site or by the local distributor prior to delivery.

Plank systems are similar to panel systems, but generally use smaller faces of foam, ranging in height from 8″ to 12″and in width from 4′ to 8’. The major difference between planks and panels is assembly. The foam planks are outfitted with ties as part of the setting sequence, rather than being pre-assembled into units.

Within these broad categories of ICFs, individual brands vary in their cavity design. “Flat wall” systems yield a continuous thickness of concrete, like a conventional poured wall. “Grid wall” systems have a waffle pattern where the concrete is thicker at some points than others. “Post and beam” systems have widely spaced horizontal and vertical columns of concrete, which is completely encapsulated in foam. Whatever the differences among ICF brands, all major ICF systems are engineer-designed, code-accepted, and field-proven.

Applications of Insulating Concrete Forms
Single-Family Homes – Since the early 1990’s, the use of ICFs in the U.S. housing market has skyrocketed. This is due to an increase in price and decline in quality of North American Lumber. In fact, according to data collected by the Portland Cement Association, it has become the fastest growing alternative to wood frame for above-grade perimeter wall construction. The number of single-family homes built from footing to eaves with ICFs has been approximately doubling each year. In 1997, about 8,000 to 10,000 above-grade ICF homes were built in the U.S. About one-third of all ICFs sold are used in above-grade residential construction.

Multi-Family Homes – Townhouses and condominiums represent a rising and significant application for ICFs. Due to the necessity for increased firewall protection and sound deadening between units in these structures, above-grade ICF walls are becoming an increasingly popular and cost-effective option for builders and developers.

Residential Basements – In cold climates, energy experts tell us up to 40% of a home’s heat loss is through the ground. ICFs create the perfect basement walls for locking out winter, and keeping more warm, heated air inside. ICFs have been used for decades in foundations and basements throughout North America. Currently, about one-third of all ICFs sold are used in residential basements.

Commercial Buildings – About another third of all ICFs are used in commercial construction, both for foundations and for above-grade walls. In addition to lowering the ongoing operating costs of the building due to the increase in energy efficiency, using ICFs for the entire structure can significantly decrease the construction cycle time, speeding up a project by weeks or even months. Commercial uses of ICFs – for hotels and motels, retail and professional buildings, warehouses, schools and churches, theaters, and others – are a rapidly growing application.

Where have ICF homes been built?
ICF homes have been built all across the U.S, in every region, and virtually every state. ICF homes are prized in the Northeast and Upper Midwest for their energy efficiency and comfortable indoor climate. Along the hurricane-plagued Eastern Seaboard and Gulf Coast, ICF homes are similarly valued for their durability and resistance to storms. In the Southwest, ICF homes keep their occupants much cooler in the summer and warmer in the winter. On the West Coast, ICF homes provide safety from earthquakes and fires.

In the provinces of Canada, the growth rate of ICF homes has exceeded even that of the United States. Spurred by government programs to encourage the construction of more energy efficient housing, more Canadian builders already know what their U.S counterparts are just now discovering: It is often less expensive to build with ICFs from footing to eaves than it is to build a stick frame house to the same insulation standard.

How to select an ICF system
Just as every brand of automobile performs the same basic function – getting you from Point A to Point B – so does every brand of ICF. However, just as you wouldn’t buy a new car without thoroughly understanding your own needs and thoroughly researching what is available, the same holds true for choosing a brand of ICF. What is the best system? Only you can really make that judgment, based on your individual needs.

The ICFA Member List has links to the websites of all members – these are the largest and most respected manufacturers/marketers of ICFs in North America. These companies will send you literature on their systems, as well as tell you if they currently have distribution and technical service in your area.

If you want some up-front guidance in your research, the ICFA and the Portland Cement Association have a number of excellent ICF brochures, books and videos, which are listed on our Publications page. These materials can take you through everything from generally comparing ICF brands to answering detailed engineering and technical questions. They are also indispensable reference tools for the building professional.

How to find an ICF contractor or builder
The ICFA Member List is a good way to locate an experienced ICF contractor. Some of the companies on the Contractor/Distributor portion of our list also act as a general contractor. However, if they do not, they can put you in touch with experienced local ICF builders and architects.

Another great source of local information is your state or provincial-level ready mixed concrete association. They would usually know where ICF homes are being built, and who the experienced ICF builders and contractors are in your area.